| Die sleeve inner diameter | 50 mm (1.97 inches) |
| Die sleeve outer diameter | 69.5 mm (2.74 inches) |
| Typical force for quality pellets | 15,220-45,670 lb (6.91-20.73 ton, 67.71-203.12 kN) |
| Die sleeve height | 50 mm (1.97 inches) |
| Assembled height with spacers (w/o powder)* | 110 mm (4.33 inches) |
| Assembled height with one spacer (w/o powder)* | 100 mm (3.94 inches) |
| Typical max pellet length** | 25 mm (1 inch) |
| Yield Strength Stainless Steel | 160,000 psi (1100 MPa) |
| Recommended max loading (@ 50%) | 80,000 psi (550 MPa) |
| Recommended max force | 182,450 lb (82.81 ton, 811.49 kN) |
| Typical force for quality pellets | 15,220-45,670 lb (6.91-20.73 ton, 67.71-203.12 kN) |
Vacuum die sets allow you to evacuate your die set before and during pressing by connection a vacuum line (not supplied) to the 1/4 inch hose connection. Choose your inner diameter (ID) from 6, 12, 25 or 50 mm. If you need another size - please order through our custom die set form.
The vacuum sets are made of D Tool Steel and operate much the same as our standard sets. If you are not connecting to a vacuum, then our standard sets are cheaper and come with less parts.
With your custom vacuum die set order we’ll include the following:
- 1x Die Sleeve
- 1x Plunger Rod
- 2x Spacers
- 1x Base plate
- 1x Vacuum fitting for a 1/4 ID vacuum hose (hose not included)
- 3x Rubber O-rings (already fitted)
- 1x Aluminum release ring with cutout for viewing pellet during release
