|Pressure range||0 -25T (0 - 34 MPa)|
|Pressure gauge||Gauge displays force in both Tons and MPa units for versatility|
|Protection Cover (optional)||Polycarbonate Safety Shield is used with the press to protect the user from fragmentation|
|Diameter of piston||95 mm|
|Max. Travel distance of the piston||30 mm|
|Pressure stability||≤1 MPa / 10 min|
|Diameter of the working station||105mm (D)|
|Supporting size||80*150 mm
Note: the N can be customizes
|Net weight||42 kg (92 lb)|
Hydraulic Press with simple all-in-one design to mitigate oil leaks. Max pressing force of 40 Tons (355 kN). This press comes with a pressure gauge and has a 7 inch (185 mm) max die height and max acceptable die diameter 4 inch (106 mm). This press can be used for exerting sufficient force for making pellets using dies under 75 mm inner diameter. If you are making low diameter pellets (<10 mm) only then it is recommended to use a smaller press which will give more sensitive control to the applied pressure.
Top pressing surface on screw thread allowing quick aligning with the top of the die set and sample removal of the die unit.
Max piston distance: 2 inch (50 mm - sufficient for use with all our dies)
Outer dimensions: 295 x 215 x 500 mm
Gross Weight: 75kg (165 lbs)