Description
We will make a custom low profile die sets to your specifications. Choose your inner diameter (ID) and we will make the other parts to match.
Low Profile Die Set - Custom Size
Choose a custom size specific to your project.
With your die set order we’ll include:
- Die sleeve
- Plunger rod
- Base plate
The design will be as per the drawings shown but tailored to your inner dimensions, height and material.
Manufacture will take approx 6 weeks + delivery. We will email you within 48 hours to confirm your requirements before going into manufacture.
The largest low profile diameter we supply 15 mm ID. The outer diameter will be 25-30 mm depending on ID size. The pressing height in the die sleeve is 8 mm. Overall assembled height is 27 mm. If you require a larger inner diameter we recommend you purchase our cylindrical die sets.
Low profile die sets are made out of stainless steel.
If you want to add on to your design (eg: an additional plunger, adding holes for thermocouples, larger OD required) there will be an additional cost sent to you for payment before we can manufacture.
Please note, we will select the outer diameter (OD)
ID<10 mm, OD = 25 mm
10 mm<ID<16 mm, OD = 30 mm
ID<0.4 inch, OD = 1 inch
0.4 inch<ID<0.6 inch, OD = 30 mm
Other Products
We can manufacture the following other custom die sets:
- Cylindrical Die Sets
- Square or Rectangular Die Sets
- Low Profile Die Sets
- Annular (Ring) Shaped Die Sets
- Vacuum Die Sets
- 2 Part Split Die sets
- 3 Part Split (Trapezoid) Die Sets
- "D" Shaped Die Sets
If you need a standard die set, we hold stock of a standard sizes at great prices here.
If you need another custom item made please complete the form here.
Safety
- Always wear googles and safety protection equipment
- Clean well after use to prevent rusting.
- Do not apply pressure beyond shown on table.
- See our tips for making perfect pellets here.
